 |
 |
 |
 |
 |
| orifice |
|
DN 2 - 6 |
|
| pressure range |
|
0 - 1950 psi |
|
| connection |
|
thread |
|
function NC
valve normally closed
 |
|
function NO
valve normally open
 |
|
| The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics. |
|
|
|
 |
| design |
direct acting, with spring return |
 |
| function |
NC - normally closed, NO - normally open |
|
| body materials |
stainless steel |
|
| seal materials |
NBR, PTFE, FPM, EPDM |
|
| media |
gaseous, liquid |
|
| actuation |
DC direct current coil
AC direct current coil, with integrated / separated rectifier |
|
| nominal voltage |
DC 24 V / AC 110 V / AC 230 V |
|
| electrical connection |
plug acc. DIN EN 175301-803, form A, LED |
|
| insulation rating |
H 180°C |
|
| enclosure protection |
IP 65 |
|
| energized duty rating |
ED 100% |
|
| flow direction |
A  B |
|
| vacuum |
leak rate < 10-6 mbar·l·s-1 |
|
| options |
function NO, approvals, mounting, special voltage, plug M 12 x 1 |
|
|
 |
 |
|
| orifice |
|
DN 2 - 14 |
|
| pressure range |
|
0 - 6000 psi |
|
| connection |
|
thread |
|
function NC
valve normally closed
|
|
|
|
| The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics. |
|
|
|
 |
| design |
direct acting, with spring return |
|
| function |
NC - normally closed |
|
| body materials |
nickel plated steel, stainless steel |
|
| seal materials |
NBR, PTFE, FPM, special seal materials |
|
| media |
gaseous, liquid |
|
| actuation |
DC direct current coil
AC direct current coil, with integrated rectifier |
|
| nominal voltage |
DC 24 V / AC 110 V / AC 230 V |
|
| electrical connection |
plug acc. DIN EN 175301-803, form A, LED |
|
| insulation rating |
H 180°C |
|
| enclosure protection |
IP 65 |
|
| energized duty rating |
ED 100% |
|
| flow direction |
A B
B A (upon request) |
|
| vacuum |
leak rate < 10-6 mbar·l·s-1 |
|
| options |
special threads, 2-coil operation, approvals, special voltage, plug M 12 x 1, terminal box |
|
|
|
 |
|
| orifice |
|
DN 8 |
|
| pressure range |
|
0 - 2400 psi |
|
| connection |
|
thread |
|
function NC
valve normally closed
 |
|
function NO
valve normally open
 |
|
| The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics. |
|
|
|
 |
| design |
pressure balanced, with spring return |
|
| function |
NC - normally closed, NO - normally open |
|
| body materials |
brass |
|
| seal materials |
NBR, PTFE, FPM |
|
| media |
emulsions / oils |
|
| actuation |
pneumatic via 5/2-way pilot valve |
|
| pilot valve interface |
NAMUR / ISO 1 |
|
| nominal voltage |
DC 24 V / AC 110 V / AC 230 V |
|
| electrical connection pilot valve |
plug acc. DIN EN 175301-803, form B, LED |
|
| enclosure protection |
IP 65 |
|
| energized duty rating |
ED 100% |
|
| flow direction |
A B
B A (without control pressure Δp 16 bar max.) |
|
| vacuum |
leak rate < 10-6 mbar·l·s-1 |
|
| options |
function NO, damping, limit switches, manual override, special voltage, coil M 12 x 1, explosion-proof, pilot valve |
|
|
|
 |
|
| orifice |
|
DN 15 - 50 |
|
| pressure range |
|
0 - 3000 psi |
|
| connection |
|
thread / flange |
|
function NC
valve normally closed
|
|
function NO
valve normally open
|
|
| The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics. |
|
|
|
 |
| design |
pressure balanced, with spring return |
|
| function |
NC - normally closed, NO - normally open |
|
| body materials |
galvanized steel, nickel plated steel, without non-ferrous metals, stainless steel |
|
| seal materials |
NBR, PTFE, FPM, CR, EPDM, special seal materials |
|
| media |
gaseous, liquid, gelatinous, highly viscous, pasty, contaminated, aggressive |
|
| actuation |
pneumatic via 5/2-way pilot valve, hydraulic via 4/2-way control valve |
|
| pilot valve interface |
NAMUR / ISO 1 |
|
| nominal voltage |
DC 24 V / AC 110 V / AC 230 V |
|
| electrical connection pilot valve |
plug acc. DIN EN 175301-803, form B, LED |
|
| enclosure protection |
IP 65 |
|
| energized duty rating |
ED 100% |
|
| flow direction |
A B
B A (without control pressure Δp 16 bar max.) |
|
| vacuum |
leak rate < 10-6 mbar·l·s-1 |
|
| options |
special threads, special flanges, function NO, damping, flush ports, leak ports, limit switches, manual override, approvals, mounting, special voltage, coil M12x1, explosion-proof, pilot valve |
|
|
|
 |
|
| orifice |
|
DN 15 - 50 |
|
| pressure range |
|
0 - 3000 psi |
|
| connection |
|
thread / flange |
|
function NC
valve normally closed
 |
|
function NO
valve normally open
 |
|
| The valves' technical design is based on media and application requirements. This can lead to deviations from the general specifications shown on the data sheet with regards to the design, sealing materials and characteristics. |
|
|
|
 |
| design |
pressure balanced, with spring return, intersecting switch-over |
|
| function |
NC - normally closed (A B), NO - normally open (A B) |
|
| body materials |
galvanized steel, nickel plated steel, without non-ferrous metals, stainless steel |
|
| seal materials |
NBR, PTFE, FPM, CR, EPDM, special seal materials |
|
| media |
gaseous, liquid, gelatinous, highly viscous, pasty, contaminated, aggressive |
|
| actuation |
pneumatic via 5/2-way pilot valve, hydraulic via 4/2-way control valve |
|
| pilot valve interface |
NAMUR / ISO 1 |
|
| nominal voltage |
DC 24 V / AC 110 V / AC 230 V |
|
| electrical connection pilot valve |
plug acc. DIN EN 175301-803, form B, LED |
|
| enclosure protection |
IP 65 |
|
| energized duty rating |
ED 100% |
|
| flow direction |
A B / A C
B A (without control pressure Δp 16 bar max.) |
|
| vacuum |
leak rate < 10-6 mbar·l·s-1 |
|
| options |
special threads, special flanges, function NO, damping, flush ports, leak ports, limit switches, manual override, approvals, mounting, special voltage, coil M12x1, explosion-proof, pilot valve |
|
|
|
 |
| co-ax type |
orifice
mm |
connection
thread NPT |
connection
flange ANSI |
pressure range
psi |
Cv
value |
media
temperature |
ambient
temperature |
switch time ms
open/close |
|
 A 45 |
DN 2 |
3/8 |
- |
0 - 1950 |
0.09 |
14°F ... 176°F |
14°F ... 176°F |
20 / 45 |
|
| A 45 |
DN 4 |
3/8 |
- |
0 - 600 / 900 |
0.37 |
14°F ... 176°F |
14°F ... 176°F |
20 / 45 |
|
| A 45 |
DN 6 |
3/8 |
- |
0 - 150 |
0.68 |
14°F ... 176°F |
14°F ... 176°F |
20 / 45 |
|
| KB 15 |
DN 2 |
3/8 |
- |
0 - 4500 / 6000 |
0.12 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 15 |
DN 3 |
3/8 |
- |
0 - 3750 / 4500 |
0.29 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 15 |
DN 4 |
3/8 |
- |
0 - 1800 / 2250 |
0.77 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 15 |
DN 5 |
3/8 |
- |
0 - 1200 / 1500 |
0.94 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 15 |
DN 6 |
3/8 |
- |
0 - 750 / 1050 |
1.21 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 15 |
DN 8 |
3/8 |
- |
0 - 450 / 600 |
1.67 |
-40°F ... 212°F |
-40°F ... 176°F |
60 / 170 |
|
| KB 20 |
DN 8 |
1/2 |
- |
0 - 750 |
2.09 |
-40°F ... 212°F |
-40°F ... 176°F |
120 / 270 |
|
| KB 20 |
DN 10 |
1/2 |
- |
0 - 525 |
2.91 |
-40°F ... 212°F |
-40°F ... 176°F |
120 / 270 |
|
| KB 20 |
DN 12 |
1/2 |
- |
0 - 375 |
3.37 |
-40°F ... 212°F |
-40°F ... 176°F |
120 / 270 |
|
| KB 20 |
DN 14 |
1/2 |
- |
0 - 225 |
3.72 |
-40°F ... 212°F |
-40°F ... 176°F |
120 / 270 |
|
| MCF-H 08 |
DN 8 |
3/8 |
- |
0 - 2400 |
1.40 |
-4°F ... 320°F |
-4°F ... 320°F |
30-3000 / 30-3000 |
|
| VMK-H/VFK-H 15 |
DN 15 |
1/2 |
2500 / 3500 |
0 - 3000 |
6.51 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 20 |
DN 20 |
3/4 |
2500 / 3500 |
0 - 3000 |
8.95 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 25 |
DN 25 |
1 |
2500 / 3500 |
0 - 3000 |
14.65 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 40 |
DN 40 |
1 1/2 |
2500 / 3500 |
0 - 3000 |
36.05 |
-4°F ... 320°F |
-4°F ... 320°F |
100-3000 / 100-3000 |
|
| VMK-H/VFK-H 50 |
DN 50 |
2 |
2500 / 3500 |
0 - 3000 |
50.00 |
-4°F ... 320°F |
-4°F ... 320°F |
100-3000 / 100-3000 |
|
| VMK-H/VFK-H 15 DR |
DN 15 |
1/2 |
2500 / 3500 |
0 - 3000 |
5.12 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 20 DR |
DN 20 |
3/4 |
2500 / 3500 |
0 - 3000 |
8.84 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 25 DR |
DN 25 |
1 |
2500 / 3500 |
0 - 3000 |
12.56 |
-4°F ... 320°F |
-4°F ... 320°F |
50-3000 / 50-3000 |
|
| VMK-H/VFK-H 40 DR |
DN 40 |
1 1/2 |
2500 / 3500 |
0 - 3000 |
36.05 |
-4°F ... 320°F |
-4°F ... 320°F |
100-3000 / 100-3000 |
|
| VMK-H/VFK-H 50 DR |
DN 50 |
2 |
2500 / 3500 |
0 - 3000 |
50.00 |
-4°F ... 320°F |
-4°F ... 320°F |
100-3000 / 100-3000 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
| co-ax type |
connection |
standard |
1 inductive
limit switch |
2 inductive
limit switches |
1 mechanical
limit switch |
manual
override |
|
| A 45 |
thread |
4.45" |
- |
- |
- |
- |
|
| KB 15 |
thread |
5.31" |
- |
- |
- |
- |
|
| KB 20 |
thread |
6.30" |
- |
- |
- |
- |
|
| MCF-H 08 |
thread |
4.72" |
4.72" (Reed) |
4.72" (Reed) |
- |
via pilot valve |
|
| VMK-H / VFK-H 15 |
thread / flange |
7.68" / 10.43" |
8.86" / 11.61" |
8.86" / 11.61" |
8.46" / 11.22" |
via pilot valve |
|
| VMK-H / VFK-H 20 |
thread / flange |
8.46" / 11.34" |
9.65" / 12.52" |
9.65" / 12.52" |
- |
via pilot valve |
|
| VMK-H / VFK-H 25 |
thread / flange |
9.06" / 12.01" |
10.24" / 13.09" |
10.24" / 13.09" |
- |
via pilot valve |
|
| VMK-H / VFK-H 40 |
thread / flange |
12.28" / 15.16" |
12.28" / 15.16" |
12.28" / 15.16" |
- |
via pilot valve |
|
| VMK-H / VFK-H 50 |
thread / flange |
12.28" / 15.16" |
12.28" / 15.16" |
12.28" / 15.16" |
- |
via pilot valve |
|
| VMK-H / VFK-H 15 DR |
thread / flange |
8.86" / 12.32" |
10.04" / 13.50" |
10.04" / 13.50" |
- |
via pilot valve |
|
| VMK-H / VFK-H 20 DR |
thread / flange |
10.12" / 14.37" |
11.30" / 15.55" |
11.30" / 15.55" |
- |
via pilot valve |
|
| VMK-H / VFK-H 25 DR |
thread / flange |
10.43" / 14.57" |
- |
- |
- |
via pilot valve |
|
| VMK-H / VFK-H 40 DR |
thread / flange |
15.75" / 19.69" |
15.75" / 19.69" |
15.75" / 19.69" |
- |
via pilot valve |
|
| VMK-H / VFK-H 50 DR |
thread / flange |
15.75" / 19.69" |
15.75" / 19.69" |
15.75" / 19.69" |
- |
via pilot valve |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
